|
|
Design of a complex HIL simulator of car boot door
Obrtáč, Tomáš ; Krejčí, Petr (referee) ; Spáčil, Tomáš (advisor)
This thesis covers the development of complex HIL simulator for the fifth car door. The beginning of the thesis is dedicated to theoretical research in the area of In-the-Loop testing. Practical part describes development of HIL simulator complemented by power electronics part. A simulation environment Matlab/Simulink was used for control design and analysis. Before the beginning of the work was measured signal part of control unit and specific signal sequences were identified. The control was applied on sbRIO device from National Instruments company with the implementation of a model on FPGA. Specific requirements for sensing speed and generation of communication signals lead to creation of unique hardware for application needs. The result of the thesis is complex HIL simulator with intuitive GUI and possibility of simulations a wide range of DC motors.
|
|
|
Features and testing of mobile devices with Android OS
Ružička, Silvestr ; Malina, Lukáš (referee) ; Balík, Miroslav (advisor)
The work deals with creating applications for the Android OS, gathering information on mobile device and testing of computing power. In this theisis we talk about the history, development and architecture of the Android OS. Described here the application development fo Android OS. Process The output of this work is an application for finding information on the mobile device and to test the computational performance.
|
|
|
MCUXpresso Web application security
Mittaš, Tomáš ; Heriban, Pavel (referee) ; Roupec, Jan (advisor)
This thesis deals with testing of the security of web application MCUXpresso Web SDK Builder using ethical hacking techniques and tools. At the beginning, the history of ethical hacking and structure of web applications are briefly mentioned. The thesis then analyses the application itself from the user’s point of view, its parts before logging in and after logging in and the operation of this application. The following is a list of the most common vulnerabilities and weaknesses found in web applications to understand any vulnerabilities found. Furthemore, the thesis deals with the techniques and tools of web application security and compares them. The penultimate chapter deals with the use of Analysis and vulnerability scanning technique on the application MCUXpresso Web SDK Builder. Finally, an application security test plan is designed, while part of this plan is automated.
|
|
|
Refaktoring in Software Development
Dilík, Ján ; Bartík, Vladimír (referee) ; Kreslíková, Jitka (advisor)
This paper deals with the subject of refactoring usage in the development of object-oriented applications. It outlines the refactoring theory and the properties that influence the software project development. Prior to refactorization, the system has to be covered with tests. The actual refactoring can be applied during the development process as bug fixing, code review or the refactoring of the whole system. Presented in this work are the impacts of refactorization of OKsystem's company OKbase product and the evaluation with respect to the refactoring concepts of object-oriented applications.
|
|
|
Infrastructure for Testing and Deployment in the Field of Containers
Ormandy, Adam ; Lengál, Ondřej (referee) ; Turoňová, Lenka (advisor)
Znížená efektivita spôsobená robením repetitívnych a manuálnych prác je častým problémom v IT. Vývojári často testujú a nasadzujú svoj software manuálne, čo je nielen náročné na čas, nezáživné a náchylné k chybám. Táto práca sa snaží v rámci jedného DevOps tímu, vyriešiť tento problém pomocou zjednotenia vývojárskych a testovacích nástrojov, a pomocou aplikovania pricípov CI a CD do produkčného prostredia. Zároveň sa sústredí na software využívajúci Python, Jenkins a kontajnery. Hlavnými použitými nástrojmi sú GitLab CI, OpenShift a Tox. Vďaka tejto práci sa podarilo zvýšit počet projektov, ktoré používajú CI/CD zo 7 na 50 percent, zvrátiť rastúci trend v počte porušení štýlu v jazyku Python, opatriť kontajnery metadátami, zautomatizovať proces tvorby kontajnerov, ušetriť čas nerobením repetitívnych úloh a pod.
|
|
|
Testing of robotic total stations Leica TCRP 1205+ and Topcon GPT 9001A
Gašparík, Michal ; Volařík, Tomáš (referee) ; Machotka, Radovan (advisor)
Bachelor's thesis Testování robotických totálních stanic Leica TCRP 1205+ a Topcon GPT 9001A deals with the verification of automated features of robotic total stations. It discusses the technology of automatic targeting and tracking the prism theoretically and practically. The practical part of the test was performed first in ideal laboratory conditions, and then experiments were repeated in a real environment, in the field. Mainly the influence of barriers and environment was observed during the testing of automatic tracking the prism. The testing of automatic targeting was compared with the manual targeting. The conclusion of the thesis confronts achieved results with the corporate specifications.
|
|
|
Automatized Testing and Deployment Support for Server Application
Maga, Martin ; Rychlý, Marek (referee) ; Křivka, Zbyněk (advisor)
Task of this master thesis is to create system for support of automated testing and deploying of server applications according to requirements defined by company AVG. The main target is create system for deploying and testing that automatically or manually test the server application in the cloud environment with ability of final deployment to the production environment with overall progress monitoring. Automated testing and deploying system has been split to the two parts. The first part is user interface that allows adding new applications, testing applications and deploying applications to its production environment. The second part represents the REST service which process testing and deploying tasks and store progress to database. System was tested with sample server's applications in Amazon Web Services cloud environment. Thesis describes general testing principles cross multiple areas. Also it contains general architecture withing diagrams, which shows use cases. At the end of thesis is described testing of samples application together with results.
|
|
|
Black-Box Analysis of Wi-Fi Stacks Security
Venger, Adam ; Orsák, Michal (referee) ; Malinka, Kamil (advisor)
Zariadenia, na ktoré sa každodenne spoliehame, sú stále zložitejšie a využívajú zložitejšie protokoly. Jedným z týchto protokolov je Wi-Fi. S rastúcou zložitosťou sa zvyšuje aj potenciál pre implementačné chyby. Táto práca skúma Wi-Fi protokol a použitie fuzz testingu pre generovanie semi-validných vstupov, ktoré by mohli odhaliť zraniteľné miesta v zariadeniach. Špeciálna pozornosť bola venovaná testovaniu Wi-Fi v systéme ESP32 a ESP32-S2. Výsledkom práce je fuzzer vhodný pre testovanie akéhokoľvek Wi-Fi zariadenia, monitorovací nástroj špeciálne pre ESP32 a sada testovacích programov pre ESP32. Nástroj neodhalil žiadne potenciálne zraniteľnosti.
|
|
|
Silver alloy wire-bonding
Búran, Martin ; Jankovský, Jaroslav (referee) ; Řezníček, Michal (advisor)
This project deals with interconnection of semiconductor chips, especially interconnection using silver alloys. First part of this project contains interconnection methods and comparison of materials, which are used in wire bonding. Project include risk factors and the most frequent defects, which can appear during bonding. Next part contains testing proposals and testing of interconnected semiconductor chips.
|
|
|
Design of watering module for mobile robot
Vizváry, Peter ; Králík, Jan (referee) ; Krejsa, Jiří (advisor)
The diploma thesis is focused on the design of a watering module for a mobile robot. The main goals of this work are to design various concepts of the watering module and their subsequent comparison, ending with the selection of the final concept, which results in its implementation in the form of a prototype with subsequent testing of its properties. The first part of this work is focused on the analysis of the issue and the definition of the assigned task together with the main parameters and requirements. The second part contains an overview of known solutions to the issue and designs for own concepts of the watering module and its individual components. The designs are compared and evaluated in terms of their performance, complexity and price. In the third part, based on the evaluation of the most promising variants, there is a selection of the final concept and after that designing and selection of the final constructional solution. The fourth part is focused on the design and implementation of the prototype, contains the selection and design of the necessary components, module assembly and the creation of the control algorithm of the watering module. The final fifth part contains testing of the functional properties of the prototype, their evaluation and subsequent suggestions for its improvement.
|
guest ::
